Skip to content

Overview#

Requirement: prepare your real vehicle hardware#

Prerequisites for the vehicle:

  • An onboard computer that satisfies the Autoware installation prerequisites
  • The following devices attached
    • Drive-by-wire interface
    • LiDAR
    • Optional: Inertial measurement unit
    • Optional: Camera
    • Optional: GNSS

1. Creating your Autoware meta-repository#

Create your Autoware meta-repository. One easy way is to fork autowarefoundation/autoware and clone it. For how to fork a repository, refer to GitHub Docs.

git clone https://github.com/YOUR_NAME/autoware.git

If you set up multiple types of vehicles, adding a suffix like "autoware.vehicle_A" or "autoware.vehicle_B" is recommended.

2. Creating the your vehicle and sensor description#

Next, you need to create description packages that define the vehicle and sensor configuration of your vehicle.

Create the following two packages:

  • YOUR_VEHICLE_launch (see here for example)
  • YOUR_SENSOR_KIT_launch (see here for example)

Once created, you need to update the autoware.repos file of your cloned Autoware repository to refer to these two description packages.

-  # sensor_kit
-  sensor_kit/sample_sensor_kit_launch:
-    type: git
-    url: https://github.com/autowarefoundation/sample_sensor_kit_launch.git
-    version: main
-  # vehicle
-  vehicle/sample_vehicle_launch:
-    type: git
-    url: https://github.com/autowarefoundation/sample_vehicle_launch.git
-    version: main
+  # sensor_kit
+  sensor_kit/YOUR_SENSOR_KIT_launch:
+    type: git
+    url: https://github.com/YOUR_NAME/YOUR_SENSOR_KIT_launch.git
+    version: main
+  # vehicle
+  vehicle/YOUR_VEHICLE_launch:
+    type: git
+    url: https://github.com/YOUR_NAME/YOUR_VEHICLE_launch.git
+    version: main

Adapt YOUR_VEHICLE_launch for autoware launching system#

At YOUR_VEHICLE_description#

Define URDF and parameters in the vehicle description package (refer to the sample vehicle description package for an example).

At YOUR_VEHICLE_launch#

Create a launch file (refer to the sample vehicle launch package for example). If you have multiple vehicles with the same hardware setup, you can specify vehicle_id to distinguish them.

Adapt YOUR_SENSOR_KIT_description for autoware launching system#

At YOUR_SENSOR_KIT_description#

Define URDF and extrinsic parameters for all the sensors here (refer to the sample sensor kit description package for example). Note that you need to calibrate extrinsic parameters for all the sensors beforehand.

At YOUR_SENSOR_KIT_launch#

Create launch/sensing.launch.xml that launches the interfaces of all the sensors on the vehicle. (refer to the sample sensor kit launch package for example).

Note

At this point, you are now able to run Autoware's Planning Simulator to do a basic test of your vehicle and sensing packages. To do so, you need to build and install Autoware using your cloned repository. Follow the steps for either Docker or source installation (starting from the dependency installation step) and then run the following command:

ros2 launch autoware_launch planning_simulator.launch.xml vehicle_model:=YOUR_VEHICLE sensor_kit:=YOUR_SENSOR_KIT map_path:=/PATH/TO/YOUR/MAP

3. Create a vehicle_interface package#

You need to create an interface package for your vehicle. The package is expected to provide the following two functions.

  1. Receive command messages from vehicle_cmd_gate and drive the vehicle accordingly
  2. Send vehicle status information to Autoware

You can find detailed information about the requirements of the vehicle_interface package in the Vehicle Interface design documentation. You can also refer to TIER IV's pacmod_interface repository as an example of a vehicle interface package.

4. Create maps#

You need both a pointcloud map and a vector map in order to use Autoware. For more information on map design, please click here.

Create a pointcloud map#

Use third-party tools such as a LiDAR-based SLAM (Simultaneous Localization And Mapping) package to create a pointcloud map in the .pcd format. For more information, please click here.

Create vector map#

Use third-party tools such as TIER IV's Vector Map Builder to create a Lanelet2 format .osm file.

5. Launch Autoware#

This section briefly explains how to run your vehicle with Autoware.

Install Autoware#

Follow the installation steps of Autoware.

Launch Autoware#

Launch Autoware with the following command:

ros2 launch autoware_launch autoware.launch.xml vehicle_model:=YOUR_VEHICLE sensor_kit:=YOUR_SENSOR_KIT map_path:=/PATH/TO/YOUR/MAP

Set initial pose#

If GNSS is available, Autoware automatically initializes the vehicle's pose.

If not, you need to set the initial pose using the RViz GUI.

  1. Click the 2D Pose estimate button in the toolbar, or hit the P key
  2. In the 3D View pane, click and hold the left mouse button, and then drag to set the direction for the initial pose.

Set goal pose#

Set a goal pose for the ego vehicle.

  1. Click the 2D Nav Goal button in the toolbar, or hit the G key
  2. In the 3D View pane, click and hold the left mouse button, and then drag to set the direction for the goal pose. If successful, you will see the calculated planning path on RViz.

Engage#

In your terminal, execute the following command.

source ~/autoware.YOURS/install/setup.bash
ros2 topic pub /autoware.YOURS/engage autoware_auto_vehicle_msgs/msg/Engage "engage: true" -1

You can also engage via RViz with "AutowareStatePanel". The panel can be found in Panels > Add New Panel > tier4_state_rviz_plugin > AutowareStatePanel.

Autoware State Panel

Now the vehicle should drive along the calculated path!

6. Tune parameters for your vehicle & environment#

You may need to tune your parameters depending on the domain in which you will operate your vehicle.