Planning Validator#
The planning_validator is a module that checks the validity of a trajectory before it is published. The status of the validation can be viewed in the /diagnostics and /validation_status topics. When an invalid trajectory is detected, the planning_validator will process the trajectory following the selected option: "0. publish the trajectory as it is", "1. stop publishing the trajectory", "2. publish the last validated trajectory".
Supported features#
The following features are supported for trajectory validation and can have thresholds set by parameters:
- Invalid field : e.g. Inf, Nan
- Trajectory points interval : invalid if any of the distance of trajectory points is too large
- Curvature : invalid if the trajectory has too sharp turns that is not feasible for the given vehicle kinematics
- Relative angle : invalid if the yaw angle changes too fast in the sequence of trajectory points
- Lateral acceleration : invalid if the expected lateral acceleration/deceleration is too large
- Longitudinal acceleration/deceleration : invalid if the acceleration/deceleration in the trajectory point is too large
- Steering angle : invalid if the expected steering value is too large estimated from trajectory curvature
- Steering angle rate : invalid if the expected steering rate value is too large
- Velocity deviation : invalid if the planning velocity is too far from the ego velocity
- Distance deviation : invalid if the ego is too far from the trajectory
The following features are to be implemented.
- (TODO) TTC calculation : invalid if the expected time-to-collision is too short on the trajectory
Inputs/Outputs#
Inputs#
The planning_validator takes in the following inputs:
| Name | Type | Description |
|---|---|---|
~/input/kinematics |
nav_msgs/Odometry | ego pose and twist |
~/input/trajectory |
autoware_auto_planning_msgs/Trajectory | target trajectory to be validated in this node |
Outputs#
It outputs the following:
| Name | Type | Description |
|---|---|---|
~/output/trajectory |
autoware_auto_planning_msgs/Trajectory | validated trajectory |
~/output/validation_status |
planning_validator/PlanningValidatorStatus | validator status to inform the reason why the trajectory is valid/invalid |
/diagnostics |
diagnostic_msgs/DiagnosticStatus | diagnostics to report errors |
Parameters#
The following parameters can be set for the planning_validator:
System parameters#
| Name | Type | Description | Default value |
|---|---|---|---|
invalid_trajectory_handling_type |
int | set the operation when the invalid trajectory is detected. 0: publish the trajectory even if it is invalid, 1: stop publishing the trajectory, 2: publish the last validated trajectory. |
0 |
publish_diag |
bool | the Diag will be set to ERROR when the number of consecutive invalid trajectory exceeds this threshold. (For example, threshold = 1 means, even if the trajectory is invalid, the Diag will not be ERROR if the next trajectory is valid.) | true |
diag_error_count_threshold |
int | if true, diagnostics msg is published. | true |
display_on_terminal |
bool | show error msg on terminal | true |
Algorithm parameters#
Thresholds#
The input trajectory is detected as invalid if the index exceeds the following thresholds.
| Name | Type | Description | Default value |
|---|---|---|---|
thresholds.interval |
double | invalid threshold of the distance of two neighboring trajectory points | 100.0 |
thresholds.relative_angle |
double | invalid threshold of the relative angle of two neighboring trajectory points | 2.0 |
thresholds.curvature |
double | invalid threshold of the curvature in each trajectory point | 1.0 |
thresholds.lateral_acc |
double | invalid threshold of the lateral acceleration in each trajectory point | 9.8 |
thresholds.longitudinal_max_acc |
double | invalid threshold of the maximum longitudinal acceleration in each trajectory point | 9.8 |
thresholds.longitudinal_min_acc |
double | invalid threshold of the minimum longitudinal deceleration in each trajectory point | -9.8 |
thresholds.steering |
double | invalid threshold of the steering angle in each trajectory point | 1.414 |
thresholds.steering_rate |
double | invalid threshold of the steering angle rate in each trajectory point | 10.0 |
thresholds.velocity_deviation |
double | invalid threshold of the velocity deviation between the ego velocity and the trajectory point closest to ego. | 100.0 |
thresholds.distance_deviation |
double | invalid threshold of the distance deviation between the ego position and the trajectory point closest to ego. | 100.0 |